This Wheel Rim Tape is made in Italy of 3M material. It is high quality. To date over a million units have been sold world wide.
SIZE: 7mm Wide x 6mt Long - enough for 4 wheel sides.
FLUORESCENT SIZE: 5mm x 6mt Long - enough for 4 wheel sides.
- Thoroughly clean the application area.
- Unwind 1.5m of Wheel Stripe.
- Tuck the Wheel Stripe into the slot on the rear side of the applicator, making sure the protective paper is on top.
- Pull a few cm of stripe out of the front part of the applicator. Peel off the silicone release liner for a few cm. Guide the adhesive stripe into the lower part of the applicator (fig 1 and 2 on back of package)
- Position the applicator on the rime edge, making sure the the applicator's guiding tab is against the rim (fig 3)
- Start applying the Wheel Stripe, pressing firmly perpendicular against the rim edge, and proceed with a slow, steady movement.
- To make the application easier, place the bike on stands to allow the wheels to revolve freely.
We are authorized dealers for 3M Quattroerre of Italy.
